OutBack Power FXR2012A Inverter/Charger Driver
Outback Off-grid Inverters Pure Sine Wave for Idaho, Washington, Montana, Oregon, California, Wyoming. OutBack FXRA The new OutBack Power Radian Series GS inverter/charger provides a comprehensive answer for. OutBack Power VFX Vented Sine Wave Inverter W. Outback Power's new FXR Series of Grid/Hybrid inverter/chargers allow you to operate in off-grid. OutBack FXR inverter/chargers can be paired with a MATE3 to add OPTICS RE to monitor and control system performance from any location. Available in power.
|Supported systems:||Windows 2008, Windows XP, Windows Vista, Windows 7/8/10|
|Price:||Free* [*Free Registration Required]|
OutBack Power FXR2012A Inverter/Charger Driver
Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 Amps respectively, in ambient temperatures as high as degrees F 40 degrees C.
Included in all of the OutBack Power FXR2012A Inverter/Charger Charge Controllers are the revolutionary features first developed by OutBack Power, including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. High surge power capabilities is OutBack Power FXR2012A Inverter/Charger of the things that make Outback inverters one of the best in the industry, providing power through the use of electric waves already in the air and transferring them into a sustainable energy source.
The charger switch is protected within a tough die-cast aluminum chassis, preventing any injury to main components of the inverter. This simplified and rugged construction is what makes it possible for OutBack Power FXR2012A Inverter/Charger inverters to go wherever they are needed. High surge powering capabilities makes starting well pumps worry free, and helps to power your TV or computer.
In fact, the power switch reacts in less than 16 milliseconds! From the Charge Controller menu, select the Charger screen. Enter the Absorb and Float settings listed in Table 2.
The table shows settings for Model 3. For other models, set the Absorb and Float voltages 0.
Enter the charge controller current limits. Each charge controller has its own current limit from the maximum setting down to five amps.
Typically the charge controller is left to the maximum setting so all available RE is accessible at all times. If for some reason the maximum current from the charge controller output needs to be limited, it can be changed from the default maximum setting on the MATE3 OutBack Power FXR2012A Inverter/Charger the following steps.
For example, if the maximum charging current for a battery bank is Adc, then the maximum current setting for GCC is also set to Adc. If the inverter OutBack Power FXR2012A Inverter/Charger 50 Adc, OutBack Power FXR2012A Inverter/Charger the GCC function in the MATE3 will then limit the total charge controller output to 50 Adc so the total net current to the batteries will be Adc.
It is important to note that GCC does not regulate or affect inverter charging at all. It simply factors the inverter current into the equation for the total net current to the battery bank. Change the Enable setting to Y es.
OutBack Power FXRA Inverter Residential grid-tie Wholesale Montreal, Quebec, Ontario, Canada
Enter the desired Maximum Battery Charge amps. Meeting these charge parameters is an indication that the battery is full and charging should stop.
This can save wear and tear on the batteries if for some reason multiple absorption cycles are initiated with minimal battery discharge. In this case, the charge parameters will probably be met more quickly than the Absorb time and can terminate the cycle so the batteries do not become overcharged. The Charged Voltage setting is typically 0. This ensures the parameter is met in case there is a discrepancy between the voltmeters of OutBack Power FXR2012A Inverter/Charger charging device and the FN-DC.
The charging current drops off more dramatically when the charging voltage is met.
OutBack Power Chargers & Inverters eBay
The FN-DC battery function that measures amps in and out of the battery can only determine SoC after measuring against other factors. This allows the FN-DC to determine when the battery bank is full.
However, OutBack Power FXR2012A Inverter/Charger single SimpliPhi 3. One possibility is to double the apparent battery size to exceed the Ah lower limit. The doubled setting will also prevent the low SoC warning light from coming on if the batteries are mostly or fully discharged.